Can You Use Seafoam To Clean Throttle Body

Key Benefits

Sea Foam Spray is specially designed to clean harmful intake valve & sleeping accommodation surface area deposits
Critically of import for cleaning GDI intake valves
Helps your engine run cleaner & last longer
Safe & easy to apply – no special tools required!

Directions

For Gas Fuel Injection

Run engine to warm intake, then turn off accessories and close off engine.
Loosen and remove intake kick from throttle body.
With Hook Guide and Cleaning Tube placed in the throttle body, straight tube nozzle cease ¼" in forepart of throttle plate location where the throttle plate opens away from nozzle (run across diagram).
Re-fit the intake boot over the Claw Guide and throttle body.
With vehicle in park and parking brake applied, start engine and agree RPM steady at two,000 for the duration of the application.
Spray continuously until contents are empty (approx. 7 minutes), so close off the engine and remove intake boot to recover Hook Guide and Tube.
With engine turned off, re-secure the intake boot onto the throttle body and let engine to hot soak for ten minutes.
After hot soak, commencement and drive the vehicle nether engine load for 10 minutes or longer. Utilise spirited dispatch when condom to burn off hydrocarbon residues.
Practise Non spray into the mass air flow sensor.
DO Non use a scan tool to increase RPM via the air bypass valve.
Not for utilise with diesel air intake systems.

For Carburetor Intakes

Run engine to warm intake, and then shut off.
Remove air filter to access carburetor throat.
With air filter removed, start engine and place tube nozzle into carburetor throat.
Depending on engine size, use ii to iv ounces sprayed in bursts to avert engine stalling.
Spray a long burst, shut off engine and let to hot soak for 10 minutes.
After hot soak, start and operate engine for 10 minutes or longer.

For Engine Fogging

With the engine running, insert Sea Foam Spray tube (cutting to shorten if needed) into intake pharynx (if carburetor) or directly before throttle plate opening (if fuel injection).
Spray a series of 3 to 5 bursts, then a final directly stream while shutting off engine. For larger engines such equally autos with a carburetor intake, utilize half-dozen bursts.
After fogging the intake, permit engine to absurd & remove spark plugs.
Insert Sea Cream Spray tube to spray each cylinder cavity.
Earlier re-inserting spark plugs, crank engine to rotate pistons (key turn, or rope pull for small engines). Notation: Deep Creep & Bounding main Cream Spray are interchangeable for chamber lubrication.

Summary

Sea Foam Spray is a blend of cleaning and lubricating petroleum ingredients that can be used SAFELY in all types of ii and 4 stroke gasoline engines. Especially important for modern GDI engines, it cleans critical upper engine areas where fuel cleaners can't achieve.

Utilize Sea Cream Spray through fuel injection throttle bodies to make clean harmful engine deposits from intake valves and combustion chamber areas. Use Bounding main Cream Spray to fog engines and coat spark plug cavities to protect your engine during storage.

Sea Foam Spray does NOT contain harsh detergent or abrasive chemicals that tin harm your engine or fuel system components. Help your engine run cleaner and last longer!

Source: https://seafoamworks.com/knowledge-base/how-to-use-sea-foam-spray/#:~:text=Especially%20important%20for%20modern%20GDI,valves%20and%20combustion%20chamber%20areas.

Posted by: hodgessiondee.blogspot.com